LMG industrial washers for anilox rolls, plates and printing components
Washing printing components
LMG Green builds specific washers for each part of the printing press: trays and ink pans, small cylinders, anilox rolls and sleeves, printing plates and large parts of rotary presses. Aufer Solutions is their exclusive distributor in Spain.
The parts washers work in a closed, sealed circuit and are built in AISI 304 stainless steel. All units carry the CE marking.
Which washer to choose
- Trays, ink pans, side covers, doctor blade chambers and tools: VEGA.
- Small cylinders (up to 150 mm diameter), trays and doctor blades: ORION.
- Large components of flexo and gravure rotary presses: LIBRA tunnel.
- Anilox rolls and sleeves, by high pressure: PEGASO.
- Anilox rolls and sleeves, by ultrasound: SIRIUS.
- Flat photopolymer plates: ELECTRA.
- Corrugated board plates: VELA.
Available industrial washer models
VEGA universal washer
For ink trays, side covers, ink tanks, doctor blades, tools and other components. According to the manufacturer, it gives optimum washing of doctor blade chambers.
- Pneumatic version for washing with industrial solvents and electric version for water and detergent.
- Washing with horizontal mechanical movement and four self-rotating double-nozzle heads.
- 100-litre stainless steel tanks with conical bottom, in wash/blow or wash/rinse/blow configuration.
- Two 500-micron stainless steel filters in each tank.
- Pneumatic pump to fill and empty the tanks without the operator transferring liquids.
- Safety: lid-opening sensor, which stops the cycle, and vacuum valve. Ready for connection to the customer’s extraction system.
ORION washer for small cylinders
For cylinders, ink trays, side covers, ink tanks, doctor blades and tools.
Features
- Moving support to hold and rotate cylinders, with Teflon supports for different sizes, even with the gear fitted. Maximum cylinder diameter: 150 mm.
- Side position for trays, doctor blades and covers.
- Horizontal carriage with washing and blowing nozzles.
- Pneumatic version for solvents and electric version for water and detergent.
- 100-litre tanks with conical bottom and two 500-micron filters, with lid-opening sensor and vacuum valve.
- AISI 304 stainless steel construction.
PEGASO washing unit for anilox rolls and sleeves (high pressure)
Washes anilox rolls and sleeves with hot chemical product and high-pressure mains water, with final blowing.
Features
- Spray bar for hot chemical product at low pressure, with a maximum consumption of 1 l/min, recirculated in a closed circuit.
- High-pressure mains water head (max. 120 bar, average consumption 8 l/min) on a moving carriage, with final compressed-air blowing (max. 5 bar).
- Motorised support that rotates the anilox roll or sleeve, adaptable to different sizes. Two Teflon caps to close the sleeves.
- 50-litre tank for the chemical product, heated to 40 °C, with level sensor.
- Electrical panel with PLC and automatic washing and blowing cycles.
- AISI 304 stainless steel construction.
SIRIUS ultrasonic washer for anilox rolls and sleeves
For small anilox rolls and sleeves, common in label printing, and large ones.
Features
- Motorised system that rotates the anilox roll so that the ultrasound covers the whole surface. Adjustable nylon supports.
- SIRIUS 500 and 1000: 40 kHz piezoelectric heads at the bottom of the tank.
- SIRIUS 1800, 2700 and 3600: sealed submersible modules in AISI 316 stainless steel with 30 piezoelectric heads at 40 kHz, 6,000 W in total. The modules can be removed for maintenance.
- Adjustment of rotation speed and liquid temperature, up to 50 °C.
- Safety: temperature probe and sensor that prevents the transducers from starting without liquid.
- AISI 304 stainless steel frame.
For the bath, Huber offers the Ultrasonic Additiv RAM 08 concentrate: see our cleaning fluids.
ELECTRA plate washer
For flat photopolymer plates from 1.14 to 3.5 mm thick, with automatic washing, rinsing and drying.
Features
- Motorised rubber rollers, oscillating brushes, squeegee rollers and hot-air drying.
- The rollers adjust automatically to the plate thickness.
- Two removable tanks with pump and level sensor, for the washing liquid and the rinse water.
- Touch screen with PLC to adjust the throughput speed.
- Washable cartridge filter. AISI 304 stainless steel frame.
VELA plate washer for corrugated board
For washing corrugated board plates with water and detergent.
Features
- Wide transparent sliding front opening, to position the plates and watch the cycle.
- Plate fixing with guides for Maider and magnetic system.
- Automatic washing, rinsing and blowing; rinsing and blowing can be excluded, and 1 to 3 passes can be programmed.
- Washing carriage with rotating brush, two wash/rinse bars and one blowing bar.
- Two 500-litre PET tanks, for washing with water and detergent and for rinsing.
- Automatic detergent dosing, PLC and ready for remote control (4.0).
- AISI 304 stainless steel washing tank with 500-micron filter.
LIBRA washing tunnel
For components of flexo and gravure rotary presses. According to the manufacturer, a complete cycle takes 30 minutes on average.
Features
- Fully pneumatic control panel, with automatic washing, rinsing and blowing depending on the version.
- Moving washing ring with reciprocating movement, carrying the washing, rinsing and blowing nozzles, to cover the whole part.
- 200-litre stainless steel tanks with conical bottom and two 500-micron filters each.
- Partially removable trolley with part positioners.
- Soundproof box for the pump and valve groups.
- Safety: door-opening sensor and vacuum valve. AISI 304 stainless steel construction.
Applications
Washing of components in flexo, gravure, offset and label printing, and of plates for corrugated board.
To recover the solvent or the wash water, see our distillers and water treatment equipment.
Ask for advice
Tell us which parts you need to wash, their dimensions and the type of ink, and we will recommend the right model. Request information.
Frequently asked questions about industrial washers
Which washer do I need?
It depends on the part: see “Which washer to choose”. We advise you according to your parts and your inks.
Do they work with solvents or with water?
VEGA and ORION have a pneumatic version for industrial solvents and an electric version for water and detergent. VELA works with water and detergent. For the other models, we will tell you the right liquid for your ink.
High pressure or ultrasound for anilox rolls?
PEGASO cleans with chemical product and high-pressure water; SIRIUS uses 40 kHz ultrasound. The choice depends on the anilox roll and the type of dirt; we will advise you.
Is the washing liquid reused?
The parts washers (VEGA, ORION and LIBRA) work in a closed, sealed circuit with 500-micron stainless steel filters, and PEGASO recirculates the chemical product. To recover dirty solvent or water, they can be combined with our distillers.
What safety features do they have?
The parts washers have a lid- or door-opening sensor that stops the cycle, and a vacuum valve, and are ready for connection to an extraction system. All units carry the CE marking.

