LMG solvent and water distillers
Solvent and water recovery for the printing industry
Aufer Solutions is the exclusive distributor in Spain of LMG Green equipment for the printing sector. LMG distillers separate and recover solvents or water contaminated during work with inks, pigments, oils or greases, so they can be reused in production.
There are two series: LM, compact, for companies with limited space, and LMA, automatic and designed for large volumes. All units carry the CE marking, and both series are also available in an ATEX version.
Which series to choose
- LM series: 12 to 120 litres load capacity. Compact, with thermal oil heating and control from a single knob.
- LMA series: 200 to 1,200 litres load capacity. Programmable automatic cycles without an operator, automatic loading and hot discharge of the residue.
We help you choose according to the solvent you use, the litres you recover per week and the space available.
LM series: compact distillers
For companies that need to recover solvent or water and have little space.
- Load capacity: 12, 30, 60 and 120 litres.
- Heating: by thermal oil.
- Easy loading and unloading: working height designed to load the contaminated solvent and remove the residue bag without strain for the operator.
- Cleaning: the boiler can be tilted for cleaning.
- Construction: solvent containment tank in AISI 304 stainless steel.
- Condensation: of the clean solvent by air condenser.
- Control: on-board electrical panel with colour display and all settings from a single knob. ATEX 2G and ATEX 3G versions.
- Double distillation: configurable cycle for solvent mixtures with different boiling points.
- End of cycle: a thermostat monitors the outlet vapours and stops the cycle if distillation finishes before the programmed time.
- Options: prepared for vacuum operation and automatic liquid loading.
LMA series: automatic distillers for large volumes
For companies that need to distil large quantities with automatic processes.
Features
- Load capacity: 200, 400 and 600 litres. The LMA 1200 has two independent 600-litre boilers, to distil two different solvent mixtures continuously.
- Control: electrical panel with Siemens colour touch screen. Several consecutive cycles can be programmed without an operator.
- Connectivity: prepared for remote control and diagnostics from the customer’s devices (4.0 configuration).
- Automatic loading of the liquid to be treated.
- Hot discharge of the residue: no waiting time, into a 200-litre drum or an IBC container. Conical-bottom boiler for easier emptying.
- Internal agitator: with brass or Teflon blades.
- Construction: condensation unit in AISI 316 stainless steel.
- Maintenance and transport: compact height to make both easier.
Safety devices
- Suppression of possible exothermic reactions by mains water inlet.
- Monitoring of the loading time in each cycle, to detect residues that have not been emptied from the boiler.
- Protective load at the end of the cycles, so the unit is left safely at rest.
- Over-temperature control of the thermal oil and the distillate.
- Mechanical devices against overpressure of vapours and thermal oil.
- Level sensors against overflow of the boiler and the sludge drum.
Applications
Recovery of solvents and water contaminated with inks, pigments, oils or greases in flexo, gravure, offset and label printing.
For washing parts, see also our washing machines, and for wash water, our water treatment equipment.
Ask for advice
Tell us which solvent you use, how many litres you recover per week and the space available, and we will recommend the right model. Request information.
Frequently asked questions about solvent distillers
Which series do I need?
It depends on the volume of solvent you use and the space available. The LM series, from 12 to 120 litres, is designed for small spaces. The LMA series, from 200 to 1,200 litres, is designed for large volumes and automatic cycles without an operator. We advise you according to your consumption.
Can it handle solvent mixtures?
Yes. The LM series can run a double-distillation cycle for mixtures with different boiling points, and the LMA 1200 distils two different mixtures in parallel.
What happens to the residue?
In the LM series it stays in a bag that is removed from the boiler. In the LMA series it is discharged hot into a 200-litre drum or an IBC container.
Are there versions for explosion-risk areas?
Yes. The LM and LMA series are available in an ATEX version; the LM series in ATEX 2G and ATEX 3G. All units carry the CE marking.
Can the process be automated?
The LMA series can run several consecutive cycles without an operator, with automatic loading and hot discharge of the residue. The LM series is prepared for automatic loading and vacuum operation.

