Water treatment and sludge compaction for the printing industry
Wash water: clarify, reuse and reduce waste
Aufer Solutions is the exclusive distributor in Spain of LMG Green equipment for the printing sector. For wash water from inks, varnishes and emulsions, LMG offers three units: the STARLIGHT clarification system, the IDRA automatic plant and the DEPUR 800 sludge compactor.
Which unit to choose
- STARLIGHT: clarification of water without chemicals, so it can be reused in production.
- IDRA: automatic treatment plant using flocculation and filtration.
- DEPUR 800: compaction of the process sludge to reduce its volume.
If you are not sure which unit you need, we will advise you according to the type of waste water and the volume you generate.
STARLIGHT clarification system
STARLIGHT extracts the water from water-ink, water-varnish or water-emulsion mixtures using a technical principle protected by a European patent. It uses no chemical additives and, according to the manufacturer, has low energy consumption. The clarified water can be reused in production, and the only residue is the original product.
- No chemicals or consumables to buy or store.
- Automatic operation 24 hours a day, without daily intervention by staff.
- No need to readjust the machine if the contaminant concentration changes.
- Optional activated carbon filter for discharge to the sewer, which must comply with each site’s discharge permit.
IDRA water treatment plant
Automatic plant for treating wash water by flocculation and filtration.
Features
- On-board electrical panel with PLC and dedicated program. Several consecutive cycles can be programmed without an operator.
- Prepared for remote control and diagnostics (4.0 configuration).
- Automatic loading of the water to be treated.
- Powder flocculant dispenser with minimum-level sensor.
- Belt filtration with non-woven fabric roll filter.
Safety and maintenance
- Level sensors against overflow of the tanks for water to be treated and clarified water.
- End-of-filter sensor.
- Low height for easier maintenance and transport.
DEPUR 800 sludge compactor
Reduces the volume of the sludge from the purification process by vertical mechanical compression, and allows the extracted water to be reused. According to the manufacturer, the volume reduction reaches up to 40 % in about 3-4 hours.
Features
- Painted steel frame.
- The container with the sludge is placed on guides inside the unit and a piston compresses it progressively.
Options
- Stainless steel sludge collection tank, with purification system and wheels.
- Filter bag (big bag) inside the tank.
- Pump for the purified water.
Applications
Treatment of wash water containing water-based inks, varnishes and emulsions in flexo, gravure and offset printing, for example the water from parts, anilox and plate washers working with water and detergent. To recover solvents, see the LMG distillers.
Ask for advice
Tell us what type of waste water you generate (inks, varnishes or emulsions), how many litres per week and whether you want to reuse or discharge the water, and we will recommend the right unit. Request information.
Frequently asked questions about water treatment
Does STARLIGHT need chemicals?
No. According to the manufacturer, it works without chemical additives or consumables.
Can I reuse the treated water?
Yes. The clarified water can be reused in production, for example for washing. The quality required depends on the use you will give it; we will advise you.
Can I discharge the water to the sewer?
STARLIGHT offers an optional activated carbon filter intended for discharge. Discharge must always comply with your site’s discharge permit; we recommend checking it with a laboratory analysis.
What is the difference between STARLIGHT and IDRA?
STARLIGHT clarifies water without chemicals. IDRA is an automatic flocculation and filtration plant, using powder flocculant and a non-woven fabric filter. The choice depends on the type of water and the volume; we will advise you.
How much does DEPUR 800 reduce the sludge volume?
According to the manufacturer, up to 40 % in about 3-4 hours. The result depends on the type of sludge.

