Cutting blades for slitting and converting
Industrial blades for slitting and converting
Aufer Solutions supplies cutting blades for slitter rewinders, cutters and converting lines for flexible materials: plastic film (PP, PE, PET, PVC), paper, board and other reel materials.
To choose the right blade you need to consider the machine’s cutting system, the material being cut and the line speed.
Cutting methods and blade types
- Circular slitter blades (shear cut): an upper knife and a lower anvil knife cut the material like scissors. This is the usual system for film and paper.
- Straight or razor blades: thin blades that cut the material under tension; widely used for thin film and light materials.
- Crush cut: a circular knife presses the material against a hardened roll; used for materials such as paper, board or adhesives.
How to choose the blade
- Material being cut: a thin film, a mineral-filled film, a laminate or a board are not cut the same way. Materials with additives or fillers wear the edge faster.
- Cutting system and machine: the diameter, thickness, holes and edge shape must match the machine’s knife holder.
- Speed and cut quality: the faster the line or the cleaner the edge must be, the more the blade material and coating matter.
To order a blade, tell us the reference or dimensions of the one you use now, the machine and the material you cut, and we will propose the available model.
Materials and coatings
Blades are made in different steels and materials, with or without coating. The coating reduces friction and edge wear, which is especially useful for films with additives, abrasive materials or fast lines. We recommend the right combination for the material you cut.
Materials that can be cut
Plastic film (PP, PE, PET, PVC and others), laminated and multilayer films, paper, board and other reel materials. If your material is not listed, ask us.
How we work
Identification
Based on the reference or dimensions of your current blade and the machine it runs on.
Recommendation
We propose the blade type, material and coating according to the material you cut and the line speed.
Three cutting systems
Circular slitter blades, straight or razor blades and crush-cut knives.
Request information
Contact us with the machine, the material and the line speed.
Frequently asked questions about cutting blades
Which blade do I need?
It depends on your machine’s cutting system (shear, razor or crush), the material and the speed. Send us this information and the reference of the blade you use now.
What is the coating for?
It reduces friction and edge wear. It is useful for films with additives or fillers, abrasive materials and fast lines.
Do you make custom blades?
No. We supply standard models: based on the reference or dimensions of your blade, we propose the equivalent model available.
Which materials can be cut?
Plastic film such as PP, PE, PET or PVC, laminates, paper and board, among others.
Are they compatible with my slitter or rewinder?
The blade must match the knife holder and cutting system of the machine. With the reference or dimensions of your current blade we check whether a compatible model is available.

